Multi Decoration

20 09 2011

What is Multi Decoration?  It’s when you combine two or three different technologies to decorate clothing.  An example of this would be combining cuttable heat transfer vinyl with transfer paper.

Multi Decoration is a great way to create custom one of a kind clothing pieces.  You can combine all the strengths of each technology in one piece of clothing.  For instance, cuttable transfer vinyl is great for lettering, but not so great with photographs.  On the other hand, dark laser transfer paper is great with photographs, but not as great for lettering.  So you can use both to create a design that would incorporate a photograph and lettering!

The image above was printed with MultiCut Ultra vinyl for the lettering, and CL Dark II for the photograph.

The advantage of this method compared with using only laser dark transfer paper is that I didn’t have to use a 11×17 sheet of laser dark paper (which would require me to use a laser printer that can print that size) and I didn’t have to use an optical eye on my cutter for the print-n-cut needed for the lettering if I were to use transfer paper.  In addition I’ve avoided the whole tacking procedure.

Also if I had chosen a metallic color (say gold or silver) for my lettering, I wouldn’t be able to do that with CL Dark II.

When using multi decoration, remember to try to keep the heat press off of the areas that have been imaged.  If there’s no way to keep the heat press off of imaged areas, ensure to heat press the items that need the highest temperatures first and do the ones with the lowest temperatures last.  Usually if you are combining transfer paper and transfer vinyl, you press heat transfer papers first (as they normally require high heat to apply), and then press heat transfer vinyl last (as they normally require much less heat to apply).  This will eliminate most problems with multi decoration.  And of course, test and wash one sample first before commercial production!

Advertisements

Actions

Information

One response

18 07 2012
Rebecca Hulme

Paropy Injet Dark Premium paper has better color retention for foam products, however, it shrinks slightly when heated therefore an image for FOAM mousepads, placemats, coasters etc must be at least 1/8″ over all sides.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s